Cut Master Automated Bandsaw

Programmed Cutting: Load, Set, Cut Up

Bandsaw Cut Master

Features

Programmed Cut Lists, Repetitive Cuts, Single Cuts,

Manual Stock Jogging, Saw Arm Raising & Lowering,

* Automated and Manual Cutting more

Rounds: 10 inch

Rectangles: 6 x 18, 10 x 16 inch

90 degree automated cuts

* 10" x 18" Saw more

Including End Cuts, Cut Lists with Specified Lengths

& Quanties, 100 Item Memory, Reset,

Partial or Full Return, in or cm, Parts Counting

& Control, Total Cut Length

* Programmed List with Robust Features more

Simple Push Buttons,

* Intuitive Control more

Air Cylinders Quickly Control the Vise, Saw Arm, & Ejector with

Easy Set Adjusters for Vise Opening, Vise Force, and Arm Height

* Quick Pneumatic Operation more

Material Stock Position is Controlled with a Stock

Pushing Shuttle Powered by a Precision Motor

* Shuttle Infeed more

* Cuts Lengths Accurately to within .001 "

Shuttle Design Allows Cutting

to the Last 1/4 inch Remnant

* Cuts to the Last 1/4" of Material Stock more

The Cut End of the Stock is Supported by a Plate

that Swings Out of the Way After the Cut is Made

to Channel Cut Parts into a Bin or Onto a Pallet

* Outfeed "Trap Door" Support more

* Outfeed Rollers & Ramp Included

Co.

How Does it Work?

A precision motor pushes the material stock through the saw with simple programmed instructions. Cutting is automatically performed by air cylinders that clamp the stock, lower the saw cutting arm, and eject cut parts.

Prices & Ordering

Safety Equipment

Pricing & Ordering